LDO spec voron trident kit has 300mm Z vs the standard BOM of 250mm Z
It is true 300mm x 300mm x 300mm
====================================
Raspberry Pi included
E3D Revo Voron Hotend included
Printed parts not included.
Contact FishFPV#2205 or JWunder#9342 on Discord for SPIFY printing service. Mention your order # to get $25 off your SPIFY order
====================================
-
New for June 2024: (Rev D) now includes Raspberry Pi 4B, LDO Leviathan Board, LDO Nitehawk toolhead board, Bondtech IGDA, pre-installed bed magnet and included printed parts for LDO-specific mods (z endstop & other misc. parts).
-
E3D Revo High-Flow Extruder with 60W heater.
-
Raspberry PI 4B with included heatsink.
-
Clockwork 2 motor included.
-
LDO bed heater Edge-to-edge heating pre-installed and wired ready to go!
-
Stainless Steel Linear Rails No more worrying about rusty rails. Remember to properly lubricate your linear rails!
-
NiteHawk USB toolhead PCB this toolhead simplifies wiring by moving to 1 usb cable (included) from the toolhead to the MCU. it also adds many other upgrades like built-in accelerometer and multiple fan connections.
-
Brass Heatset Insert Tool We've included a custom machined brass tip for your soldering iron, use it to install heat-set inserts with ease!
-
Input Shaper Tool We threw in a toolkit that includes all the necessary parts to help you perform input shaper calibration, hassle free.
-
Pre-cut & Pre-wired Our kit includes all necessary wiring: cut to the right length and pre-crimped or soldered to their respective parts. See instructions in LDO's detailed wiring guide.
-
Touch Screen Display - We've replaced the standard 12864 LCD with an IPS Capacitive Touch Display to use with KlipperScreen.
-
LED Lighting - Bring lighting to your Voron with included LED strips and all necessary wiring!
-
Nevermore Filter - We include parts for an optional internal circulation filter: the Nevermore Micro V5 by 0ndsk4 (carbon pellets not included due to shipping restrictions).
-
Klicky Mod - Instead of the included Omron inductive probe, We also provide the parts to build your machine using the optional Klicky mod by jlas1.
-
Small Tools - We include a small set of hex wrenches for all the fasteners used in the build (Preparing your own set of good quality hex wrenches is still recommended). Also included is a small flathead screwdriver that is useful in many situations.
-
2mm Drill Bit - Metric drill bits may be rare in some parts of the world, so we included one. Use it to ream the filament path in your printed extruder parts.
-
HoneyBadger bed heater install guide - Step-by-step guide for a perfect edge-to-edge heater install
-
Printed Parts Guide (LDO supplement) - Are you planning on printing parts before the kit arrives? Read our supplementary print guide to see which parts to print/replace/omit.
-
Wiring Guide - We created this supplementary wiring guide to go along with the included cable kit. We recommend reading the guide ahead of time: Some cable routing is required while you assemble the mechanical components.
-
Tuning Guide - We highly recommend reading over this very detailed guide by Ellis to help print the best possible-looking parts.
-
Cable Chain Guide - See this guide for tips on our included cable chains (also known as drag chains).
-
UK2.5 Terminal Guide - See this guide for tips on using the UK2.5 terminals included in our kits.
