Release V2.4 of the VORON2 lineup of 3D printers. This release re-focused on simplicity and cost for VORON2, and has been redesigned from the ground up to be more streamlined, easier to source, more fun to build, and generally a better machine to own. In short, what VORON used to stand for.
Stainless Steel Linear Rails- 12H size rails for X axis included. No more worrying about rusty rails. Remember to properly lubricate your linear rails!
Toolhead PCB- The LDO kit includes a modifiedHartk toolhead PCB. In addition, they designed a toolhead breakout PCB to make wiring at the controller end simple and straightforward.
Brass Heatset Insert Tool- Includes a custom machined brass tip for your soldering iron, use it to install heatset inserts with ease!
Input Shaper Tool- A toolkit that includes all the necessary parts to help you perform input shaper calibration, hassle free.
Pre-cut & Pre-wired- Kit includes all necessary wiring: cut to the right length and pre-crimped or soldered to their respective parts.
LED Lighting- Bring lighting to your Voron with included LED strips and all necessary wiring!
Nevermore Filter- Includes parts for an optional internal circulation filter: theNevermore Micro V5by 0ndsk4 (carbon pellets not included due to shipping restrictions).
Klicky Mod- LDO provides the parts to build your machine using the optionalKlicky modby jlas1.
Small Tools- Include a small set of hex wrenches for all the fasteners used in the build (Preparing your own set of good quality hex wrenches is still recommended). Also included is a small flat head screwdriver that is useful in a surprising number of situations.
2mm Drill Bit- Metric drill bits may not be very common in some parts of the world, so we included one. Use it to ream the filament path in your printed extruder parts.
Printed parts not included (Contact FishFPV#2205 or JWunder#9342 on Discord for SPIFY printing service)
All required fasteners
All required belts, pulleys, idlers, bearings, and shafts (Gates)
All required cables, precut and pre-crimped.
required parts for afterburner direct drive extruder
LDO Stainless Steel Rails of required lengths
LDO Voron 2.4 motor kit
LDO V2.4 Frame kit
Mini 12864 LCD Display (BTT)
BigTreeTech Octopus V1.1
7 x TMC2209 Stepper Drivers (BTT)
Mean Well LRS-200-24
AC inlet integrated switch and fuse, CAT6 Insert
OMRON SSR and DIN Mount
Magnetic Pad and Spring Steel Flex Plate
Build Plate, Cast 5083 Alloy, Blanchard Ground
Keenovo Silicone thermal pad for bed heating and 125c thermal fuse
40x40x10 centrifugal fan ; 40x40x20 Axial Fan ; 2 x 60x60x20 Axial Fans
PCB's - Toolhead, Breakout, LED Junction, XT Endstop, Z Endstop
Klicky Probe Kit
LDO Input Shaper Kit
Nevermore Micro V5 Parts
drag cable chains
PTFE bowden tube
VHB tape ; foam panel tape
Notable features for this release:
Afterburner Toolhead System, features minimal parts you actually swap, and improved cooling of both hot end and parts. Comes in both Direct Feed and Bowden configurations. We've incorporated all feedback received during the beta testing process and made it much easier to assemble.
Direct drive A and B motors allow for smoother belt path and less parasitic loses. Also reduces noise and ringing, while improving machine reliability.
Z rails are now centered on the vertical extrusions, allowing use of almost any 2020 T slot profile available.
Increased Y travel. There's now a full 10mm of over-travel on Y axis, allowing one to use the Z nozzle probe without sacrificing build plate space.
XY joints and Z idlers now use regular 20T toothed pulleys, reducing complexity and cost, while improving reliability of the machine. Z idlers are also simplified and now use single screw for belt tension adjustment.
Z drives now accommodate any metal 80T pulley available on the market, including ones with flanges. Metal 80T improve accuracy over printed 80T pulleys, and allow for more consistent gantry leveling results.
New front idlers are vastly simplified and also feature single screw belt tension adjustment. This allows users to get more consistent results when tensioning belts and, more importantly, while trying to match the belt tensions of a group of belts.
Part counts and variety has been reduced, and printed parts now require much less plastic.
Improved bed mounting using globally sourceable spacers in order to help eliminate bed distortion during the build process.
Front panel is now a set of doors, using magnetic latches and print-in-place hinges.
Screw-down panel clips from V2.1 return with a re-design and improved installation method. They are now almost as quick as the quick-release panel clips to install and remove.
Rear fan housing has been redesigned to help utilize more of the filter material. It now uses a 60mm fan for easier 24V sourcing.
Rear plug panel sees the return of the integrated non-filtered mains inlet, which is much cheaper and easier to source. It also features dual Keystone terminal slots for easy port extendability (CAT6, USB, etc).
Electronics compartment layout has been improved to allow better cooling and easier component management. DIN3 (35mm) rails are the standard configuration now which bring with it much improved installation and maintenance experience. Electronic compartment cooling is now provided by dual 60mm fans, significantly improving component cooling.
Take advantage of the Voron on Discord: https://discord.gg/voron. The community is very active on Discord and the users are very helpful on the channel.
Download Fusion 360 and get a free license to view the 3D model of the printer. The 3D model is a very useful reference when the manual is ambiguous or unclear.