LDO spec voron trident kit has 300mm Z vs the standard BOM of 250mm Z
It is true 300mm x 300mm x 300mm
Raspberry Pi included
E3D Revo Voron Hotend included
Printed parts not included.
Contact FishFPV#2205 or JWunder#9342 on Discord for SPIFY printing service. Mention your order # to get $25 off your SPIFY order
Features & Extras
Stainless Steel Linear Rails- No more worrying about rusty rails. Remember toproperly lubricateyour linear rails!
Toolhead PCB- Our kit includes a modifiedHartk toolhead PCB. In addition, we designed a toolhead breakout PCB to make wiring at the controller end simple and straightforward.
Brass Heatset Insert Tool- We've included a custom machined brass tip for your soldering iron, use it to install heatset inserts with ease! Checkherefor more information.
Input Shaper Tool- We threw in a toolkit that includes all the necessary parts to help you perform input shaper calibration, hassle free.
Pre-cut & Pre-wired- Our kit includes all necessary wiring: cut to the right length and pre-crimped or soldered to their respective parts. See our detailed wiring guidehere.
Touch Screen Display- We've replaced the standard 12864 LCD with an IPS Capacitive Touch Display to use withKlipperScreen.
LED Lighting- Bring lighting to your Voron with included LED strips and all necessary wiring!
Nevermore Filter- We include parts for an optional internal circulation filter: theNevermore Micro V5by 0ndsk4 (carbon pellets not included due to shipping restrictions).
Klicky Mod- Instead of the included Omron inductive probe, We also provide the parts to build your machine using the optionalKlicky modby jlas1.
Small Tools- We include a small set of hex wrenches for all the fasteners used in the build (Preparing your own set of good quality hex wrenches is still recommended). Also included is a small flat head screwdriver that is useful in a surprising number of situations.
2mm Drill Bit- Metric drill bits may not be very common in some parts of the world, so we included one. Use it to ream the filament path in your printed extruder parts.
Check outNero 3DandSteve Build's Youtube channels, both are part of the Voron team and have tons of useful videos for building Vorons.
Printed Parts Guide (LDO supplement)- Are you planning on printing parts before the kit arrives? Read oursupplementary print guideto see which parts to print/replace/omit.
Wiring Guide- We created thissupplementary wiring guideto go along with the included cable kit. We recommend reading the guide ahead of time: Some cable routing is required while you assemble the mechanical components.
Tuning Guide- Wehighlyrecommend reading over this very detailedtuning guideby Ellis to help print out the best possible looking parts.
Cable Chain Guide- See our short guideherefor tips on our included cable chains (also known as drag chains).
UK2.5 Terminals- See thisshort guidefor tips on using the UK2.5 terminals included in our kits.