250/300mm :: Machines out of 6.35mm thick 5083 (K100S) aluminum cast tooling plate
350mm :: Machines out of 9mm thick 5083 (K100S) aluminum cast tooling plate
Optimized to work with multiple mounting points
Voron 1.8
Voron 2.4
Voron Trident
Each plate is checked on granite surface to ensure it is within spec
Now, a word of warning, if you are using an inductive sensor, you WILL have issues leveling your bed if you choose the magbed option. Our magnets are very strong, and they mess with inductive sensors, some capacitive sensors, and even BLTouch. If you choose to use BLTouch, you will have to dodge magnets while probing your bed. We do not provide the coordinates for this, so it will be up to you to figure out.
Our magbeds are a top magnet design bed, meaning that the magnets are slightly below the surface of the magbed. This gives a very superior holding power, however, it does require a very good quality build plate, such as Buildtak, or Subtle.Design. The manufacturers of those flex plates use a 0.5mm thick sheet. Thinner sheets may dimple slightly under the magnet. A lot of China build plates are not up to the challenge.
